xx network Client
The xx network client is a library and related command line tool that facilitate making full-featured xx clients for all platforms. The command line tool can be built for any platform supported by golang. The libraries are built for iOS and Android using gomobile.
This repository contains everything necessary to implement all of the xx network messaging features. These include the end-to-end encryption and metadata protection. It also contains features to extend the base messaging protocols.
For library writers, the client requires a writable folder to store data, functions for receiving and approving requests for creating secure end-to-end messaging channels, for discovering users, and for receiving different types of messages. Details for implementing these features are in the Library Overview section below.
The client is open source software released under the simplified BSD License.
Command Line Usage
The command line tool is intended for testing xx network functionality and not for regular user use.
Compilation (assuming golang 1.13 or newer):
git clone https://gitlab.com/elixxir/client.git client
cd client
go mod vendor -v
go mod tidy
go test ./...
# Linux 64 bit binary
GOOS=linux GOARCH=amd64 CGO_ENABLED=0 go build -ldflags '-w -s' -o client.linux64 main.go
# Windows 64 bit binary
GOOS=windows GOARCH=amd64 CGO_ENABLED=0 go build -ldflags '-w -s' -o client.win64 main.go
# Windows 32 big binary
GOOS=windows GOARCH=386 CGO_ENABLED=0 go build -ldflags '-w -s' -o release/client.win32 main.go
# Mac OSX 64 bit binary (intel)
GOOS=darwin GOARCH=amd64 CGO_ENABLED=0 go build -ldflags '-w -s' -o release/client.darwin64 main.goTo get an NDF from a network gateway and the permissioning server, use the getndf subcommand. The getndf subcommand allows command line users to poll the NDF from both a gateway and the permissioning server without any pre-established client connection. It requires an IP address, port, and ssl certificate. You can download an ssl cert with:
openssl s_client -showcerts -connect permissioning.prod.cmix.rip:11420 < /dev/null 2>&1 | openssl x509 -outform PEM > certfile.pemExample usage for Gateways:
$ go run main.go getndf --gwhost localhost:8440 --cert ~/integration/keys/cmix.rip.crt | jq . | head
{
"Timestamp": "2021-01-29T01:19:49.227246827Z",
"Gateways": [
{
"Id": "BRM+Iotl6ujIGhjRddZMBdauapS7Z6jL0FJGq7IkUdYB",
"Address": ":8440",
"Tls_certificate": "-----BEGIN CERTIFICATE-----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\n6m52PyzMNV+2N21IPppKwA==\n-----END CERTIFICATE-----\n"
},
{
"Id": "JCBd9mAQb2BW8hc8H9avy1ubcjUAa7MHrPp0dBU/VqQB",Example usage for the Permissioning server:
$ go run main.go getndf --permhost localhost:18000 --cert ~/integration/keys/cmix.rip.crt | jq . | head
{
"Timestamp": "2021-01-29T01:19:49.227246827Z",
"Gateways": [
{
"Id": "BRM+Iotl6ujIGhjRddZMBdauapS7Z6jL0FJGq7IkUdYB",
"Address": ":8440",
"Tls_certificate": "-----BEGIN CERTIFICATE-----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\n6m52PyzMNV+2N21IPppKwA==\n-----END CERTIFICATE-----\n"
},
{
"Id": "JCBd9mAQb2BW8hc8H9avy1ubcjUAa7MHrPp0dBU/VqQB",Basic command line usage, sending unsafe, unencrypted messages to yourself:
client --password user-password --ndf ndf.json -l client.log -s session-directory --writeContact user-contact.json --unsafe -m \"Hello World, without E2E Encryption\"-
--passwordis the password used to encrypt and load the session. -
--ndfis the network definition file, downloadable from the xx network website when available. -
-lthe file to write logs (user messages are still printed to stdout) -
--writeContactOutput the user's contact information to this file. -
--unsafeSend message without encryption (necessary whenever you have not already established an e2e channel) -
-mThe message to send
The client defaults to sending to itself when not supplied.
Sending unsafe messages between 2 users:
# Get user contact jsons
client --password user1-password --ndf ndf.json -l client1.log -s user1session --writeContact user1-contact.json --unsafe -m "Hi"
client --password user2-password --ndf ndf.json -l client2.log -s user2session --writeContact user2-contact.json --unsafe -m "Hi"
# Send messages to each other, run them in the background so they both receive
# each other's messages
client --password user1-password --ndf ndf.json -l client1.log -s user1session --destfile user2-contact.json --unsafe -m "Hi User 2, from User 1 without E2E Encryption" &
client --password user2-password --ndf ndf.json -l client2.log -s user2session --destfile user1-contact.json --unsafe -m "Hi User 1, from User 2 without E2E Encryption" &-
--destfileis used to specify the recipient. You can also use--destid b64:...using the user's base64 id which is printed in the logs.
To send with end to end encryption, you must first establish a connection with the other user:
# Get user contact jsons
client --password user1-password --ndf ndf.json -l client1.log -s user1session --writeContact user1-contact.json --unsafe -m "Hi"
client --password user2-password --ndf ndf.json -l client2.log -s user2session --writeContact user2-contact.json --unsafe -m "Hi"
# Send E2E Messages
client --password user1-password --ndf ndf.json -l client1.log -s user1session --destfile user2-contact.json --unsafe-channel-creation -m "Hi User 2, from User 1 with E2E Encryption" &
client --password user2-password --ndf ndf.json -l client2.log -s user2session --destfile user1-contact.json --unsafe-channel-creation -m "Hi User 1, from User 2 with E2E Encryption" &Note that we have dropped the --unsafe in exchange for:
-
--unsafe-channel-creationAuto-create and auto-accept channel requests.
To be considered "safe" the user should be prompted. You can do this
with the command line by explicitly accepting the channel creation
when sending and/or explicitly accepting a request with
--accept-channel.
Full usage of client can be found with client --help:
$ ./client --help
Usage:
client [flags]
client [command]
Available Commands:
generate Generates version and dependency information for the
Elixxir binary
help Help about any command
version Print the version and dependency information for the
Elixxir binary
Flags:
--accept-channel Accept the channel request for the
corresponding recipient ID
--destfile string Read this contact file for the destination id
-d, --destid string ID to send message to (if below 40, will be
precanned. Use '0x' or 'b64:' for hex and
base64 representations) (default "0")
--forceHistoricalRounds Force all rounds to be sent to historical
round retrieval
-h, --help help for client
-l, --log string Path to the log output path (- is stdout)
(default "-")
-m, --message string Message to send
-n, --ndf string Path to the network definition JSON file
(default "ndf.json")
-p, --password string Password to the session file
--receiveCount uint How many messages we should wait for before
quitting (default 1)
--regcode string Registration code (optional)
--sendCount uint The number of times to send the message
(default 1)
--sendDelay uint The delay between sending the messages in ms
(default 500)
--sendid uint Use precanned user id (must be between 1 and
40, inclusive)
-s, --session string Sets the initial directory for client storage
--unsafe Send raw, unsafe messages without e2e
encryption.
--unsafe-channel-creation Turns off the user identity authenticated
channel check, automatically approving
authenticated channels
-v, --verbose Verbose mode for debugging
--waitTimeout uint The number of seconds to wait for messages to
arrive (default 15)
-w, --writeContact string Write the contact file for this user to this
file
Use "client [command] --help" for more information about a command.Note that the client cannot be used on the betanet with precanned user ids.
Library Overview
The xx client is designed to be used as a go library (and by extension a c library).
Support is also present for go mobile to build Android and iOS libraries. We bind all exported symbols from the bindings package for use on mobile platforms.
Implementation Notes
Clients need to perform the same actions in the same order as shown in
cmd/root.go. Specifically, certain handlers need to be registered and
set up before starting network threads (i.e., before StartNetworkFollowers
-- #2 below) and you cannot perform certain actions until the network
connection reaches the "healthy" state. Below are relevant code listings for
how to do these actions.
the ndf is the network definition file, downloadable from the xx network website when available.
- Creating and/or Loading a client:
//create a new client if none exist
if _, err := os.Stat(storeDir); os.IsNotExist(err) {
// Load NDF
ndfPath := viper.GetString("ndf")
ndfJSON, err := ioutil.ReadFile(ndfPath)
if err != nil {
jww.FATAL.Panicf(err.Error())
}
err = api.NewClient(string(ndfJSON), storeDir,
[]byte(pass), regCode)
}
if err != nil {
jww.FATAL.Panicf("%+v", err)
}
}
//load the client
client, err := api.Login(storeDir, []byte(pass))
if err != nil {
jww.FATAL.Panicf("%+v", err)
}- Set up registration, authorization request handlers
user := client.GetUser()
// Set up reception handler
swboard := client.GetSwitchboard()
recvCh := make(chan message.Receive, 10000) // Needs to be large
// Note the name below is arbitrary
listenerID := swboard.RegisterChannel("DefaultCLIReceiver",
switchboard.AnyUser(), message.Text, recvCh)
jww.INFO.Printf("Message ListenerID: %v", listenerID)
// Set up auth request handler, which simply prints the
// user id of the requestor.
authMgr := client.GetAuthRegistrar()
authMgr.AddGeneralRequestCallback(printChanRequest)
...
func printChanRequest(requestor contact.Contact, message string) {
msg := fmt.Sprintf("Authentication channel request from: %s\n",
requestor.ID)
jww.INFO.Printf(msg)
fmt.Printf(msg)
msg = fmt.Sprintf("Authentication channel request message: %s\n", message)
jww.INFO.Printf(msg)
fmt.Printf(msg)
// Or you can auto confirm with:
// err := client.ConfirmAuthenticatedChannel(
// requestor)
}- Start network threads and wait until network is healthy:
err = client.StartNetworkFollower()
if err != nil {
jww.FATAL.Panicf("%+v", err)
}
// Wait until connected or crash on timeout
connected := make(chan bool, 10)
client.GetHealth().AddChannel(connected)
waitUntilConnected(connected)
...
func waitUntilConnected(connected chan bool) {
waitTimeout := time.Duration(viper.GetUint("waitTimeout"))
timeoutTimer := time.NewTimer(waitTimeout * time.Second)
isConnected := false
//Wait until we connect or panic if we can't by a timeout
for !isConnected {
select {
case isConnected = <-connected:
jww.INFO.Printf("Network Status: %v\n",
isConnected)
break
case <-timeoutTimer.C:
jww.FATAL.Panic("timeout on connection")
}
}
}- Adding authenticated channels (if we haven't done it yet)
if client.HasAuthenticatedChannel(recipientID) {
jww.INFO.Printf("Authenticated channel already in place for %s",
recipientID)
return
}
// Check if a channel exists for this recipientID
recipientContact, err := client.GetAuthenticatedChannelRequest(
recipientID)
if err == nil {
jww.INFO.Printf("Accepting existing channel request for %s",
recipientID)
err := client.ConfirmAuthenticatedChannel(recipientContact)
if err != nil {
jww.FATAL.Panicf("%+v", err)
}
return
} else {
recipientContact = recipient
}
me := client.GetUser().GetContact()
jww.INFO.Printf("Requesting auth channel from: %s",
recipientID)
err := client.RequestAuthenticatedChannel(recipientContact,
me, msg)
if err != nil {
jww.FATAL.Panicf("%+v", err)
}- Sending E2E and Unsafe Messages
msg := message.Send{
Recipient: recipientID,
Payload: []byte(msgBody),
MessageType: message.Text,
}
paramsE2E := params.GetDefaultE2E()
paramsUnsafe := params.GetDefaultUnsafe()
fmt.Printf("Sending to %s: %s\n", recipientID, msgBody)
var roundIDs []id.Round
if unsafe {
roundIDs, err = client.SendUnsafe(msg,
paramsUnsafe)
} else {
roundIDs, _, err = client.SendE2E(msg,
paramsE2E)
}
if err != nil {
jww.FATAL.Panicf("%+v", err)
}
jww.INFO.Printf("RoundIDs: %+v\n", roundIDs)The "RoundIDs" are the rounds in which your message parts were sent. After those rounds have completed on the network, you can assume that the message has "sent" successfully. See the client interface section for info on how to access round state changes.
- Receiving Messages (assuming you set the receiver above in step 2)
timeoutTimer := time.NewTimer(waitTimeout * time.Second)
select {
case <-timeoutTimer.C:
fmt.Println("Timed out!")
break
case m := <-recvCh:
fmt.Printf("Message received: %s\n", string(
m.Payload))
break
}The main entry point for developing with the client is api/client (or
bindings/client). We recommend using go doc to explore:
go doc -all ./api
go doc -all ./interfacesLooking at the API will, for example, show you there is a RoundEvents callback registration function, which lets your client see round events:
func (c *Client) GetRoundEvents() interfaces.RoundEvents
RegisterRoundEventsCb registers a callback for round events.and then inside interfaces:
type RoundEvents interface {
// designates a callback to call on the specified event
// rid is the id of the round the event occurs on
// callback is the callback the event is triggered on
// timeout is the amount of time before an error event is returned
// valid states are the states which the event should trigger on
AddRoundEvent(rid id.Round, callback ds.RoundEventCallback,
timeout time.Duration, validStates ...states.Round) *ds.EventCallback
// designates a go channel to signal the specified event
// rid is the id of the round the event occurs on
// eventChan is the channel the event is triggered on
// timeout is the amount of time before an error event is returned
// valid states are the states which the event should trigger on
AddRoundEventChan(rid id.Round, eventChan chan ds.EventReturn,
timeout time.Duration, validStates ...states.Round) *ds.EventCallback
//Allows the un-registration of a round event before it triggers
Remove(rid id.Round, e *ds.EventCallback)
}Which, when investigated, yields the following prototype:
// Callbacks must use this function signature
type RoundEventCallback func(ri *pb.RoundInfo, timedOut bool)showing that you can receive a full RoundInfo object for any round event received by the client library on the network.
Building the Library for iOS and Android
To set up Gomobile for Android, install the NDK and pass the -ndk flag
to $ gomobile init. Other repositories that use Gomobile for
binding should include a shell script that creates the bindings. For
iOS, gomobile must be run on an OS X machine with Xcode installed.
Important reference info:
To clone and build:
# Go mobile install
go get -u golang.org/x/mobile/cmd/gomobile
go get -u golang.org/x/mobile/bind
gomobile init... # Note this line will be different depending on sdk/target!
# Get and test code
git clone https://gitlab.com/elixxir/client.git client
cd client
go mod vendor -v
go mod tidy
go test ./...
# Android
gomobile bind -target android -androidapi 21 gitlab.com/elixxir/client/bindings
# iOS
gomobile bind -target ios gitlab.com/elixxir/client/bindings
zip -r iOS.zip Bindings.frameworkYou can verify that all symbols got bound by unzipping
bindings-sources.jar and inspecting the resulting source files.
Every time you make a change to the client or bindings, you must
rebuild the client bindings into a .aar or iOS.zip to propagate those
changes to the app. There's a script that runs gomobile for you in the
bindings-integration repository.
Roadmap
See the larger network documentation for more, but there are 2 specific parts of the roadmap that are intended for the client:
- Ephemeral IDs - Sending messages to users with temporal/ephemeral recipient user identities.
- User Discovery - A bot that will allow the user to look for others on the network.
- Notifications - An optional notifications system which uses firebase
- Efficiency improvements - mechanisms for message pickup and network tracking
- will evolve to allow tradeoffs and options for use
We also are always looking at how to simplify and improve the library interface.