Newer
Older
# NOTE: This is verbose on purpose.
set -e
mv results results.bak || rm -fr results || true
rm -fr blob* || true
rm server-5.qdstrm || true
rm server-5.qdrep || true
mkdir -p .elixxir
if [ $# -gt 1 ]
then
echo "usage: $0 [gatewayip:port]"
exit
fi
NETWORKENTRYPOINT=$1
UDBOUT=results/udb-console.txt
CLIENTCLEAN=results/clients-cleaned
CLIENTOPTS="--password hello --ndf results/ndf.json --waitTimeout 240 --unsafe-channel-creation -v $DEBUGLEVEL"
CLIENTUDOPTS="--password hello --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTSINGLEOPTS="--password hello --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTGROUPOPTS="--password hello --ndf results/ndf.json -v $DEBUGLEVEL"
mkdir -p $CLIENTCLEAN
if [ "$NETWORKENTRYPOINT" == "betanet" ]
then
NETWORKENTRYPOINT=$(sort -R betanet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "protonet" ]
then
NETWORKENTRYPOINT=$(sort -R protonet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "release" ]
then
NETWORKENTRYPOINT=$(sort -R release.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "devnet" ]
then
NETWORKENTRYPOINT=$(sort -R devnet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "" ]
then
NETWORKENTRYPOINT=$(head -1 network.config)
fi
echo "NETWORK: $NETWORKENTRYPOINT"
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
echo "STARTING SERVERS..."
UDBID=$(../bin/client init -s results/udbsession -l results/udbidgen.log --password hello --ndf ndf.json --writeContact results/udContact.bin -v $DEBUGLEVEL)
echo "GENERATED UDB ID: $UDBID"
PERMCMD="../bin/permissioning --logLevel $DEBUGLEVEL -c permissioning.yaml "
$PERMCMD > results/permissioning-console.txt 2>&1 &
echo "$PERMCMD -- $PIDVAL"
# Run Client Registrar
CLIENT_REG_CMD="../bin/client-registrar \
-l 2 -c client-registrar.yaml"
$CLIENT_REG_CMD > results/client-registrat-console.txt 2>&1 &
PIDVAL=$!
echo "$CLIENT_REG_CMD -- $PIDVAL"
for SERVERID in $(seq 5 -1 1)
do
IDX=$(($SERVERID - 1))
SERVERCMD="../bin/server --logLevel $DEBUGLEVEL --config server-$SERVERID.yaml"
if [ $SERVERID -eq 5 ] && [ -n "$NSYSENABLED" ]
then
SERVERCMD="nsys profile --session-new=gputest --trace=cuda -o server-$SERVERID $SERVERCMD"
fi
$SERVERCMD > $SERVERLOGS/server-$SERVERID-console.txt 2>&1 &
PIDVAL=$!
echo "$SERVERCMD -- $PIDVAL"
done
# Start gateways
for GWID in $(seq 5 -1 1)
IDX=$(($GWID - 1))
GATEWAYCMD="../bin/gateway --logLevel $DEBUGLEVEL --config gateway-$GWID.yaml"
$GATEWAYCMD > $GATEWAYLOGS/gateway-$GWID-console.txt 2>&1 &
PIDVAL=$!
echo "$GATEWAYCMD -- $PIDVAL"
Richard T. Carback III
committed
jobs -p > results/serverpids
Richard T. Carback III
committed
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
finish() {
echo "STOPPING SERVERS AND GATEWAYS..."
if [ -n "$NSYSENABLED" ]
then
nsys stop --session=gputest
fi
# NOTE: jobs -p doesn't work in a signal handler
for job in $(cat results/serverpids)
do
echo "KILLING $job"
kill $job || true
done
sleep 5
for job in $(cat results/serverpids)
do
echo "KILL -9 $job"
kill -9 $job || true
done
#tail $SERVERLOGS/*
#tail $CLIENTCLEAN/*
#diff -aruN clients.goldoutput $CLIENTCLEAN
}
trap finish EXIT
trap finish INT
# Sleeps can die in a fire on the sun, we wait for the servers to start running
# rounds
rm rid.txt || true
touch rid.txt
cnt=0
echo -n "Waiting for a round to run"
while [ ! -s rid.txt ] && [ $cnt -lt 120 ]; do
sleep 1
grep -a "RID 1 ReceiveFinishRealtime END" results/servers/server-* > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
Richard T. Carback III
committed
done
# Start a user discovery bot server
echo "STARTING UDB..."
UDBCMD="../bin/udb --logLevel $DEBUGLEVEL --config udb.yaml -l 1"
$UDBCMD >> $UDBOUT 2>&1 &
PIDVAL=$!
echo $PIDVAL >> results/serverpids
echo "$UDBCMD -- $PIDVAL"
rm rid.txt || true
while [ ! -s rid.txt ] && [ $cnt -lt 30 ]; do
sleep 1
grep -a "Sending Poll message" results/udb-console.txt > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
done
echo "localhost:8440" > results/startgwserver.txt
echo "DONE LETS DO STUFF"
else
echo "Connecting to network defined at $NETWORKENTRYPOINT"
echo $NETWORKENTRYPOINT > results/startgwserver.txt
fi
echo "DOWNLOADING TLS Cert..."
CMD="openssl s_client -showcerts -connect $(cat results/startgwserver.txt)"
echo $CMD
eval $CMD < /dev/null 2>&1 > "results/startgwcert.bin"
CMD="cat results/startgwcert.bin | openssl x509 -outform PEM"
echo $CMD
eval $CMD > "results/startgwcert.pem"
head "results/startgwcert.pem"
echo "DOWNLOADING NDF..."
CLIENTCMD="../bin/client getndf --gwhost $(cat results/startgwserver.txt) --cert results/startgwcert.pem"
eval $CLIENTCMD >> results/ndf.json 2>&1 &
echo "$CLIENTCMD -- $PIDVAL"
Richard T. Carback III
committed
wait $PIDVAL
cat results/ndf.json | jq . | head -5
Richard T. Carback III
committed
file results/ndf.json
if [ ! -s results/ndf.json ]
then
echo "results/ndf.json is empty, cannot proceed"
exit -1
fi
#export GRPC_GO_LOG_VERBOSITY_LEVEL=99
#export GRPC_GO_LOG_SEVERITY_LEVEL=info
Jonah Husson
committed
echo "RUNNING CLIENTS..."
runclients() {
echo "Starting clients..."
Rick Carback
committed
# Now send messages to each other
# TODO: Change the recipients to send multiple messages. We can't
# run multiple clients with the same user id so we need
# updates to make that work.
# for nid in 1 2 3 4; do
for nid in 1
do
nid=$(((($cid + 1) % 4) + 4))
eval NICK=\${NICK${cid}}
mkdir -p blob$cid
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client$cid$nid.log -s blob$cid/blob$cid --unsafe --sendid $cid --destid $nid --sendCount 20 --receiveCount 20 -m \"Hello, $nid\""
eval $CLIENTCMD >> $CLIENTOUT/client$cid$nid.txt 2>&1 &
Rick Carback
committed
PIDVAL=$!
eval CLIENTS${CTR}=$PIDVAL
echo "$CLIENTCMD -- $PIDVAL"
CTR=$(($CTR + 1))
done
echo "WAITING FOR $CTR CLIENTS TO EXIT..."
for i in $(seq 0 $(($CTR - 1)))
eval echo "Waiting on \${CLIENTS${i}} ..."
eval wait \${CLIENTS${i}}
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
#if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
#then
#
# echo "RUNNING BASIC CLIENTS..."
# runclients
# echo "RUNNING BASIC CLIENTS (2nd time)..."
# runclients
#
# # Send E2E messages between a single user
# mkdir -p blob9
# mkdir -p blob18
# mkdir -p blob91
# echo "TEST E2E WITH PRECANNED USERS..."
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client19.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob19/blob19 --slowPolling --sendid 19 --destid 19 -m \"Hi 19->19, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client19.txt 2>&1 &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
#
#
# # Send E2E messages between two users
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 3 --receiveCount 3 -s blob9/blob9 --sendid 9 --destid 18 -m \"Hi 9->18, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
# PIDVAL1=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18.log --sendDelay 1000 --sendCount 3 --receiveCount 3 -s blob18/blob18 --sendid 18 --destid 9 -m \"Hi 18->9, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client18.txt 2>&1 &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL1
# wait $PIDVAL2
#
#
# # Send multiple E2E encrypted messages between users that discovered each other
# echo "SENDING MESSAGES TO PRECANNED USERS AND FORCING A REKEY..."
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18_rekey.log --sendCount 20 --receiveCount 20 --destid 9 -s blob18/blob18 -m \"Hello, 9, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client18_rekey.txt 2>&1 || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9_rekey.log --sendCount 20 --receiveCount 20 --destid 18 -s blob9/blob9 -m \"Hello, 18, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client9_rekey.txt 2>&1 || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL || true
#
# echo "FORCING HISTORICAL ROUNDS... (NON-E2E, PRECAN)"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client35.log -s blob35 --sendid 1 --destid 2 --sendCount 5 --receiveCount 5 -m \"Hello from 1, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client35.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client36.log -s blob36 --sendid 2 --destid 1 --sendCount 5 --receiveCount 5 -m \"Hello from 2, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client36.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
#
# echo "FORCING MESSAGE PICKUP RETRY... (NON-E2E, PRECAN)"
# # Higher timeouts for this test to allow message pickup retry to function
# CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client20.log -s blob20 --sendid 20 --destid 21 --sendCount 5 --receiveCount 5 -m \"Hello from 20, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client20.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client21.log -s blob21 --sendid 21 --destid 20 --sendCount 5 --receiveCount 5 -m \"Hello from 21, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client21.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
#
#
#fi
## Non-precanned E2E user messaging
#echo "SENDING E2E MESSAGES TO NEW USERS..."
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --writeContact $CLIENTOUT/rick42-contact.bin --unsafe -m \"Hello from Rick42 to myself, without E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#PIDVAL=$!
#echo "$CLIENTCMD -- $PIDVAL"
#wait $PIDVAL
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --writeContact $CLIENTOUT/ben43-contact.bin --destfile $CLIENTOUT/rick42-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
#eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
#PIDVAL2=$!
#echo "$CLIENTCMD -- $PIDVAL"
#
#while [ ! -s $CLIENTOUT/ben43-contact.bin ]; do
# sleep 1
# echo -n "."
#done
#
#
#TMPID=$(cat $CLIENTOUT/client42.log | grep -a "User\:" | awk -F' ' '{print $5}')
#RICKID=${TMPID}
#echo "RICK ID: $RICKID"
#TMPID=$(cat $CLIENTOUT/client43.log | grep -a "User\:" | awk -F' ' '{print $5}')
#BENID=${TMPID}
#echo "BEN ID: $BENID"
#
## Client 42 will now wait for client 43's E2E Auth channel request and confirm
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#PIDVAL=$!
#echo "$CLIENTCMD -- $PIDVAL"
#wait $PIDVAL
#wait $PIDVAL2
#
## Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#PIDVAL=$!
#echo "$CLIENTCMD -- $PIDVAL"
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
#PIDVAL2=$!
#echo "$CLIENTCMD -- $PIDVAL"
#wait $PIDVAL
#wait $PIDVAL2
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#PIDVAL=$!
#echo "$CLIENTCMD -- $PIDVAL"
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
#PIDVAL2=$!
#echo "$CLIENTCMD -- $PIDVAL"
#wait $PIDVAL
#wait $PIDVAL2
#
#echo "DELETING CONTACT FROM CLIENT..."
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --delete-channel --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#echo "$CLIENTCMD -- $PIDVAL"
#PIDVAL1=$!
#wait $PIDVAL1
## NOTE the command below causes the following EXPECTED error:
## panic: Could not confirm authentication channel for HTAmEeBhbLi6aFqcWsi3OZNDE/642GAchpATjhYFTHwD, waited 120 seconds.
## Note that the above is example, client IDs will vary
#CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
#eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
#PIDVAL2=$!
#echo "$CLIENTCMD -- $PIDVAL"
#wait $PIDVAL2
########### KEEP COMMENTED OUT, DO NOT UNCOMMENT WHEN UNCOMMENTING OUT ABOVE ################################
Richard T. Carback III
committed
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
# echo "CREATING USERS for REKEY TEST..."
# JAKEID=$(../bin/client init -s blob100 -l $CLIENTOUT/client100.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Jake100-contact.bin -v $DEBUGLEVEL)
# NIAMHID=$(../bin/client init -s blob101 -l $CLIENTOUT/client101.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Niamh101-contact.bin -v $DEBUGLEVEL)
# echo "JAKE ID: $JAKEID"
# echo "NIAMH ID: $NIAMHID"
# REKEYOPTS="--e2eMaxKeys 15 --e2eMinKeys 10 --e2eNumReKeys 5"
# # Client 101 will now send auth request
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --writeContact $CLIENTOUT/Niamh101-contact.bin --destfile $CLIENTOUT/Jake100-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
# eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# # Client 100 will now wait for client 101's E2E Auth channel request and confirm
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 0 --receiveCount 0"
# eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
# echo "RUNNING REKEY TEST..."
# # Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 20 -m \"Hello from Jake100, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 20 --receiveCount 20 -m \"Hello from Niamh101, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
# # Now we are just going to exhaust all the keys we have and see if we
# # use the unconfirmed channels
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 0 -m \"Hello from Jake100, with E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# # And receive those messages sent to us
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 0 --receiveCount 20"
# eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL2
# echo "FORCING HISTORICAL ROUNDS..."
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client35.log -s blob35 --sendid 1 --destid 2 --sendCount 5 --receiveCount 5 -m \"Hello from 1, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client35.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client36.log -s blob36 --sendid 2 --destid 1 --sendCount 5 --receiveCount 5 -m \"Hello from 2, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client36.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
# echo "FORCING MESSAGE PICKUP RETRY... "
# # Higher timeouts for this test to allow message pickup retry to function
# CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client20.log -s blob20 --sendid 20 --destid 21 --sendCount 5 --receiveCount 5 -m \"Hello from 20, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client20.txt || true &
# PIDVAL=$!
# echo "$CLIENTCMD -- $PIDVAL"
# CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client21.log -s blob21 --sendid 21 --destid 20 --sendCount 5 --receiveCount 5 -m \"Hello from 21, without E2E Encryption\""
# eval $CLIENTCMD >> $CLIENTOUT/client21.txt || true &
# PIDVAL2=$!
# echo "$CLIENTCMD -- $PIDVAL"
# wait $PIDVAL
# wait $PIDVAL2
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
################### Do not uncomment above, it was meant to be commented out
# Proto user test: client25 and client26 generate a proto user JSON file and close.
# Both clients are restarted and load from their respective proto user files and attempt to send.
# Generate contact and proto user file for client25
echo "TESTING PROTO USER FILE..."
CLIENTCMD="../bin/client proto -l $CLIENTOUT/client25.log -s junk25 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/josh25-contact.bin --protoUserOut $CLIENTOUT/client25Proto.json --unsafe -m \"Hello from Rick42 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Generate contact and proto user file for client 26
CLIENTCMD="../bin/client proto -l $CLIENTOUT/client26.log -s junk26 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jonah26-contact.bin --protoUserOut $CLIENTOUT/client26Proto.json --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
while [ ! -s $CLIENTOUT/jonah26-contact.bin ]; do
sleep 1
echo -n "."
done
# Print IDs to console
TMPID=$(cat $CLIENTOUT/client25.log | grep -a "User\:" | awk -F' ' '{print $5}')
JOSHID=${TMPID}
echo "JOSH ID: $JOSHID"
TMPID=$(cat $CLIENTOUT/client26.log | grep -a "User\:" | awk -F' ' '{print $5}')
JONAHID=${TMPID}
echo "JONAH ID: $JONAHID"
# Client 25 will now wait for client 26's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client proto $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --protoUserPath $CLIENTOUT/client25Proto.json --destfile $CLIENTOUT/jonah26-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Send E2E messages
CLIENTCMD="timeout 240s ../bin/client proto $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --protoUserPath $CLIENTOUT/client25Proto.json --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client proto $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --protoUserPath $CLIENTOUT/client26Proto.json --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client proto $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --protoUserPath $CLIENTOUT/client25Proto.json --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client proto $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --protoUserPath $CLIENTOUT/client26Proto.json --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Single-use test: client53 sends message to client52; client52 responds with
# the same message in the set number of message parts
echo "TESTING SINGLE-USE"
# Generate contact file for client52
CLIENTCMD="../bin/client init -s blob52 -l $CLIENTOUT/client52.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jono52-contact.bin"
eval $CLIENTCMD >> /dev/null 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Start client53, which sends a message and then waits for a response
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client53.log -s blob53 --maxMessages 8 --message \"Test single-use message\" --send -c $CLIENTOUT/jono52-contact.bin --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client53.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
# Start client52, which waits for a message and then responds
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client52.log -s blob52 --reply --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client52.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
Richard T. Carback III
committed
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
# UD Test
echo "TESTING USER DISCOVERY..."
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --register josh13 --addemail josh13@elixxir.io --addphone 6178675309US"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --register josh31 --addemail josh31@elixxir.io --addphone 6178675310US"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --searchusername josh31 --searchemail josh31@elixxir.io --searchphone 6178675310US"
eval $CLIENTCMD > $CLIENTOUT/josh31.bin|| true &
PIDVAL1=$!
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --searchusername josh13 --searchemail josh13@elixxir.io --searchphone 6178675309US"
eval $CLIENTCMD > $CLIENTOUT/josh13.bin || true &
PIDVAL2=$!
wait $PIDVAL1
wait $PIDVAL2
# Send auth chan request
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
# Approve request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh31, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh13, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Test Remove User
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --remove josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13-2.log -s blob13-2 --register josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13-2.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
fi
Richard T. Carback III
committed
echo "TESTING GROUP CHAT..."
# Create authenticated channel between client 80 and 81
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --writeContact $CLIENTOUT/client80-contact.bin --unsafe -m \"Hello from contact 80 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client81.log -s blob81 --writeContact $CLIENTOUT/client81-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
while [ ! -s $CLIENTOUT/client81-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client80.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT80ID=${TMPID}
echo "CLIENT 80 ID: $CLIENT80ID"
TMPID=$(cat $CLIENTOUT/client81.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT81ID=${TMPID}
echo "CLIENT 81 ID: $CLIENT81ID"
# Client 81 will now wait for client 81's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client81-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL2
# Create authenticated channel between client 80 and 82
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client82.log -s blob82 --writeContact $CLIENTOUT/client82-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
while [ ! -s $CLIENTOUT/client82-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client82.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT82ID=${TMPID}
echo "CLIENT 82 ID: $CLIENT82ID"
# Client 82 will now wait for client 82's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client82-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL3
# User 1 Creates Group
echo "Group User IDs: $CLIENT80ID $CLIENT81ID $CLIENT82ID"
echo "b64:$CLIENT81ID" > $CLIENTOUT/groupParticipants
echo "b64:$CLIENT82ID" >> $CLIENTOUT/groupParticipants
CLIENTCMD="timeout 360s ../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --create $CLIENTOUT/groupParticipants --message \"80 inviting 81 and 82 to new group\""
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
eval $CLIENTCMD > $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Extract group ID -- Note to Jono this probably needs to be fixed!
GROUPID=$(cat $CLIENTOUT/client80.log | grep -a "NewGroupID\:" | awk -F' ' '{print $5}')
echo "Group ID: $GROUPID"
# Print the group list from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Print group from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Now everyone sends their message
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 80\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 81\""
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 82\""
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Everyone waits for their message
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Member 2 leaves the group
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --leave $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL2
# 1 and 3 send a message successfully now, 2 does not
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello 2 from 80\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello 2 from 82\""
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# All 3 wait again
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
sort -b -o "$CLIENTOUT/client80.txt" "$CLIENTOUT/client80.txt"
sort -b -o "$CLIENTOUT/client81.txt" "$CLIENTOUT/client81.txt"
sort -b -o "$CLIENTOUT/client82.txt" "$CLIENTOUT/client82.txt"
echo "GROUP CHAT FINISHED!"
cp $CLIENTOUT/*.txt $CLIENTCLEAN/
sed -i.bak 's/Sending\ to\ .*\:/Sent:/g' $CLIENTCLEAN/client*.txt
sed -i.bak 's/Message\ from\ .*, .* Received:/Received:/g' $CLIENTCLEAN/client*.txt
Richard T. Carback III
committed
sed -i.bak 's/ERROR.*Signature/Signature/g' $CLIENTCLEAN/client*.txt
sed -i.bak 's/[Aa]uthenticat.*$//g' $CLIENTCLEAN/client*.txt
rm $CLIENTCLEAN/client*.txt.bak
# for C in $(ls -1 $CLIENTCLEAN); do
# sort -o tmp $CLIENTCLEAN/$C || true
# uniq tmp $CLIENTCLEAN/$C || true
# done
GOLDOUTPUT=clients.goldoutput
if [ "$NETWORKENTRYPOINT" != "localhost:8440" ]
then
rm -fr clients.net_goldoutput || true
GOLDOUTPUT=clients.net_goldoutput
cp -ra clients.goldoutput clients.net_goldoutput
# Delete the localhost only files
rm $GOLDOUTPUT/client13* || true
rm $GOLDOUTPUT/client18* || true
rm $GOLDOUTPUT/client19* || true
rm $GOLDOUTPUT/client2[01]* || true
rm $GOLDOUTPUT/client31* || true
rm $GOLDOUTPUT/client3[56]* || true
rm $GOLDOUTPUT/client45* || true
rm $GOLDOUTPUT/client56* || true
rm $GOLDOUTPUT/client67* || true
rm $GOLDOUTPUT/client74* || true
rm $GOLDOUTPUT/client9* || true
fi
echo "TESTS EXITED SUCCESSFULLY, CHECKING OUTPUT..."
diff -aruN $GOLDOUTPUT $CLIENTCLEAN
cat $CLIENTOUT/client42.log | grep -a "Could not confirm authentication channel" > results/deleteContact.txt || true
echo "CHECKING FOR SUCCESSFUL CONTACT DELETION"
if [ -s results/deleteContact.txt ]
then
echo "CONTACT DELETION SUCCESSFUL"
else
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
#cat $CLIENTOUT/* | strings | grep -ae "ERROR" -e "FATAL" > results/client-errors || true
#diff -ruN results/client-errors.txt noerrors.txt
cat $SERVERLOGS/server-*.log | grep -a "ERROR" | grep -a -v "context" | grep -av "metrics" | grep -av "database" > results/server-errors.txt || true
cat $SERVERLOGS/server-*.log | grep -a "FATAL" | grep -a -v "context" | grep -av "transport is closing" | grep -av "database" >> results/server-errors.txt || true
diff -aruN results/server-errors.txt noerrors.txt
IGNOREMSG="GetRoundBufferInfo: Error received: rpc error: code = Unknown desc = round buffer is empty"
cat $GATEWAYLOGS/*.log | grep -a "ERROR" | grep -av "context" | grep -av "certificate" | grep -av "Failed to read key" | grep -av "$IGNOREMSG" > results/gateway-errors.txt || true
cat $GATEWAYLOGS/*.log | grep -a "FATAL" | grep -av "context" | grep -av "transport is closing" >> results/gateway-errors.txt || true
diff -aruN results/gateway-errors.txt noerrors.txt
fi