Newer
Older
# NOTE: This is verbose on purpose.
set -e
mv results results.bak || rm -fr results || true
rm -fr blob* || true
rm server-5.qdstrm || true
rm server-5.qdrep || true
mkdir -p .elixxir
if [ $# -gt 1 ]
then
echo "usage: $0 [gatewayip:port]"
exit
fi
NETWORKENTRYPOINT=$1
UDBOUT=results/udb-console.txt
CLIENTCLEAN=results/clients-cleaned
CLIENTOPTS="--password hello --ndf results/ndf.json --verify-sends --waitTimeout 360 --unsafe-channel-creation -v $DEBUGLEVEL"
CLIENTUDOPTS="--password hello --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTSINGLEOPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTGROUPOPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTFILETRANSFEROPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
mkdir -p $CLIENTCLEAN
if [ "$NETWORKENTRYPOINT" == "betanet" ]
then
NETWORKENTRYPOINT=$(sort -R betanet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "mainnet" ]
NETWORKENTRYPOINT=$(sort -R mainnet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "release" ]
then
NETWORKENTRYPOINT=$(sort -R release.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "devnet" ]
then
NETWORKENTRYPOINT=$(sort -R devnet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "" ]
then
NETWORKENTRYPOINT=$(head -1 network.config)
fi
echo "NETWORK: $NETWORKENTRYPOINT"
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
echo "STARTING SERVERS..."
Richard T. Carback III
committed
# Copy udbContact into place when running locally.
cp udbContact.bin results/udbContact.bin
PERMCMD="../bin/permissioning --logLevel $DEBUGLEVEL -c permissioning.yaml "
$PERMCMD > results/permissioning-console.txt 2>&1 &
echo "$PERMCMD -- $PIDVAL"
# Run Client Registrar
CLIENT_REG_CMD="../bin/client-registrar \
-l 2 -c client-registrar.yaml"
$CLIENT_REG_CMD > results/client-registrat-console.txt 2>&1 &
PIDVAL=$!
echo "$CLIENT_REG_CMD -- $PIDVAL"
for SERVERID in $(seq 5 -1 1)
do
IDX=$(($SERVERID - 1))
SERVERCMD="../bin/server --logLevel $DEBUGLEVEL --config server-$SERVERID.yaml"
if [ $SERVERID -eq 5 ] && [ -n "$NSYSENABLED" ]
then
SERVERCMD="nsys profile --session-new=gputest --trace=cuda -o server-$SERVERID $SERVERCMD"
fi
$SERVERCMD > $SERVERLOGS/server-$SERVERID-console.txt 2>&1 &
PIDVAL=$!
echo "$SERVERCMD -- $PIDVAL"
done
# Start gateways
for GWID in $(seq 5 -1 1)
IDX=$(($GWID - 1))
GATEWAYCMD="../bin/gateway --logLevel $DEBUGLEVEL --config gateway-$GWID.yaml"
$GATEWAYCMD > $GATEWAYLOGS/gateway-$GWID-console.txt 2>&1 &
PIDVAL=$!
echo "$GATEWAYCMD -- $PIDVAL"
Richard T. Carback III
committed
jobs -p > results/serverpids
Richard T. Carback III
committed
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
finish() {
echo "STOPPING SERVERS AND GATEWAYS..."
if [ -n "$NSYSENABLED" ]
then
nsys stop --session=gputest
fi
# NOTE: jobs -p doesn't work in a signal handler
for job in $(cat results/serverpids)
do
echo "KILLING $job"
kill $job || true
done
sleep 5
for job in $(cat results/serverpids)
do
echo "KILL -9 $job"
kill -9 $job || true
done
#tail $SERVERLOGS/*
#tail $CLIENTCLEAN/*
#diff -aruN clients.goldoutput $CLIENTCLEAN
}
trap finish EXIT
trap finish INT
# Sleeps can die in a fire on the sun, we wait for the servers to start running
# rounds
rm rid.txt || true
touch rid.txt
cnt=0
echo -n "Waiting for a round to run"
while [ ! -s rid.txt ] && [ $cnt -lt 120 ]; do
sleep 1
grep -a "RID 1 ReceiveFinishRealtime END" results/servers/server-* > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
Richard T. Carback III
committed
done
# Start a user discovery bot server
echo "STARTING UDB..."
UDBCMD="../bin/udb --logLevel $DEBUGLEVEL --protoUserPath udbProto.json --config udb.yaml -l 1"
$UDBCMD >> $UDBOUT 2>&1 &
PIDVAL=$!
echo $PIDVAL >> results/serverpids
echo "$UDBCMD -- $PIDVAL"
rm rid.txt || true
while [ ! -s rid.txt ] && [ $cnt -lt 30 ]; do
sleep 1
grep -a "Sending Poll message" results/udb-console.txt > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
done
echo "localhost:8440" > results/startgwserver.txt
echo "DONE LETS DO STUFF"
else
echo "Connecting to network defined at $NETWORKENTRYPOINT"
echo $NETWORKENTRYPOINT > results/startgwserver.txt
fi
echo "DOWNLOADING TLS Cert..."
CMD="openssl s_client -showcerts -connect $(cat results/startgwserver.txt)"
echo $CMD
eval $CMD < /dev/null 2>&1 > "results/startgwcert.bin"
CMD="cat results/startgwcert.bin | openssl x509 -outform PEM"
echo $CMD
eval $CMD > "results/startgwcert.pem"
head "results/startgwcert.pem"
echo "DOWNLOADING NDF..."
CLIENTCMD="../bin/client getndf --gwhost $(cat results/startgwserver.txt) --cert results/startgwcert.pem"
eval $CLIENTCMD >> results/ndf.json 2>&1 &
echo "$CLIENTCMD -- $PIDVAL"
Richard T. Carback III
committed
wait $PIDVAL
cat results/ndf.json | jq . | head -5
Richard T. Carback III
committed
file results/ndf.json
if [ ! -s results/ndf.json ]
then
echo "results/ndf.json is empty, cannot proceed"
exit -1
fi
#export GRPC_GO_LOG_VERBOSITY_LEVEL=99
#export GRPC_GO_LOG_SEVERITY_LEVEL=info
Jonah Husson
committed
echo "RUNNING CLIENTS..."
runclients() {
echo "Starting clients..."
Rick Carback
committed
# Now send messages to each other
# TODO: Change the recipients to send multiple messages. We can't
# run multiple clients with the same user id so we need
# updates to make that work.
# for nid in 1 2 3 4; do
for nid in 1
do
nid=$(((($cid + 1) % 4) + 4))
eval NICK=\${NICK${cid}}
mkdir -p blob$cid
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client$cid$nid.log -s blob$cid/blob$cid --unsafe --sendid $cid --destid $nid --sendCount 20 --receiveCount 20 -m \"Hello, $nid\""
eval $CLIENTCMD >> $CLIENTOUT/client$cid$nid.txt 2>&1 &
Rick Carback
committed
PIDVAL=$!
eval CLIENTS${CTR}=$PIDVAL
echo "$CLIENTCMD -- $PIDVAL"
CTR=$(($CTR + 1))
done
echo "WAITING FOR $CTR CLIENTS TO EXIT..."
for i in $(seq 0 $(($CTR - 1)))
eval echo "Waiting on \${CLIENTS${i}} ..."
eval wait \${CLIENTS${i}}
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
echo "RUNNING BASIC CLIENTS..."
runclients
echo "RUNNING BASIC CLIENTS (2nd time)..."
runclients
# Send E2E messages between a single user
mkdir -p blob9
mkdir -p blob18
mkdir -p blob91
echo "TEST E2E WITH PRECANNED USERS..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18.log --sendDelay 1000 --sendCount 2 --receiveCount 2 -s blob18/blob18 --slowPolling --sendid 18 --destid 18 -m \"Hi 18->18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Send E2E messages between two users
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendDelay 1000 --sendCount 3 --receiveCount 3 -s blob9/blob9 --sendid 9 --destid 18 -m \"Hi 9->18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18.log --sendDelay 1000 --sendCount 3 --receiveCount 3 -s blob18/blob18 --sendid 18 --destid 9 -m \"Hi 18->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18.txt 2>&1 &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL1
wait $PIDVAL2
# Send multiple E2E encrypted messages between users that discovered each other
echo "SENDING MESSAGES TO PRECANNED USERS AND FORCING A REKEY..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18_rekey.log --sendCount 20 --receiveCount 20 --destid 9 -s blob18/blob18 -m \"Hello, 9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18_rekey.txt 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9_rekey.log --sendCount 20 --receiveCount 20 --destid 18 -s blob9/blob9 -m \"Hello, 18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9_rekey.txt 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL || true
echo "FORCING HISTORICAL ROUNDS... (NON-E2E, PRECAN)"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client35.log -s blob35 --sendid 1 --destid 2 --sendCount 5 --receiveCount 5 -m \"Hello from 1, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client35.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client36.log -s blob36 --sendid 2 --destid 1 --sendCount 5 --receiveCount 5 -m \"Hello from 2, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client36.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "FORCING MESSAGE PICKUP RETRY... (NON-E2E, PRECAN)"
# Higher timeouts for this test to allow message pickup retry to function
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client20.log -s blob20 --sendid 20 --destid 21 --sendCount 5 --receiveCount 5 -m \"Hello from 20, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client20.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client21.log -s blob21 --sendid 21 --destid 20 --sendCount 5 --receiveCount 5 -m \"Hello from 21, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client21.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Non-precanned E2E user messaging
echo "SENDING E2E MESSAGES TO NEW USERS..."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --writeContact $CLIENTOUT/rick42-contact.bin --unsafe -m \"Hello from Rick42 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --writeContact $CLIENTOUT/ben43-contact.bin --destfile $CLIENTOUT/rick42-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
while [ ! -s $CLIENTOUT/ben43-contact.bin ]; do
sleep 1
echo -n "."
done
TMPID=$(cat $CLIENTOUT/client42.log | grep -a "User\:" | awk -F' ' '{print $5}')
RICKID=${TMPID}
echo "RICK ID: $RICKID"
TMPID=$(cat $CLIENTOUT/client43.log | grep -a "User\:" | awk -F' ' '{print $5}')
BENID=${TMPID}
echo "BEN ID: $BENID"
# Client 42 will now wait for client 43's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --delete-channel --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
echo "$CLIENTCMD -- $PIDVAL"
PIDVAL1=$!
# NOTE the command below causes the following EXPECTED error:
# panic: Could not confirm authentication channel for HTAmEeBhbLi6aFqcWsi3OZNDE/642GAchpATjhYFTHwD, waited 120 seconds.
# Note that the above is example, client IDs will vary
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
echo "NOTE: The command above causes an EXPECTED failure to confirm authentication channel!"
echo "CREATING USERS for REKEY TEST..."
JAKEID=$(../bin/client init -s blob100 -l $CLIENTOUT/client100.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Jake100-contact.bin -v $DEBUGLEVEL)
NIAMHID=$(../bin/client init -s blob101 -l $CLIENTOUT/client101.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Niamh101-contact.bin -v $DEBUGLEVEL)
echo "JAKE ID: $JAKEID"
echo "NIAMH ID: $NIAMHID"
Richard T. Carback III
committed
REKEYOPTS="--e2eMaxKeys 15 --e2eMinKeys 10 --e2eNumReKeys 5 --e2eRekeyThreshold 0.75"
# Client 101 will now send auth request
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --writeContact $CLIENTOUT/Niamh101-contact.bin --destfile $CLIENTOUT/Jake100-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
# Client 100 will now wait for client 101's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
Richard T. Carback III
committed
echo "RUNNING REKEY TEST..."
# Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 20 -m \"Hello from Jake100, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 20 --receiveCount 20 -m \"Hello from Niamh101, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
Richard T. Carback III
committed
# Now we are just going to exhaust all the keys we have and see if we
# use the unconfirmed channels
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 0 -m \"Hello from Jake100, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# And receive those messages sent to us
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 0 --receiveCount 20"
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL2
echo "FORCING HISTORICAL ROUNDS..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client35.log -s blob35 --sendid 1 --destid 2 --sendCount 5 --receiveCount 5 -m \"Hello from 1, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client35.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client36.log -s blob36 --sendid 2 --destid 1 --sendCount 5 --receiveCount 5 -m \"Hello from 2, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client36.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "FORCING MESSAGE PICKUP RETRY... "
# Higher timeouts for this test to allow message pickup retry to function
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client20.log -s blob20 --sendid 20 --destid 21 --sendCount 5 --receiveCount 5 -m \"Hello from 20, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client20.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client21.log -s blob21 --sendid 21 --destid 20 --sendCount 5 --receiveCount 5 -m \"Hello from 21, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client21.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Proto user test: client25 and client26 generate a proto user JSON file and close.
# Both clients are restarted and load from their respective proto user files and attempt to send.
# Generate contact and proto user file for client25
echo "TESTING PROTO USER FILE..."
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client25.log -s blob11420 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/josh25-contact.bin --protoUserOut $CLIENTOUT/client25Proto.json "
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Generate contact and proto user file for client 26
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client26.log -s blob11421 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jonah26-contact.bin --protoUserOut $CLIENTOUT/client26Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Clients will now load from the protoUser file and write to session
CLIENTCMD="timeout 60s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --protoUserPath $CLIENTOUT/client25Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 60s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --protoUserPath $CLIENTOUT/client26Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL
wait $PIDVAL2
# Continue with E2E testing with session files loaded from proto
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --writeContact $CLIENTOUT/josh25-contact.bin --unsafe -m \"Hello from Josh25 to myself, without E2E Encryption\" "
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --writeContact $CLIENTOUT/jonah26-contact.bin --destfile $CLIENTOUT/josh25-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
while [ ! -s $CLIENTOUT/jonah26-contact.bin ]; do
sleep 1
echo -n "."
done
# Print IDs to console
TMPID=$(cat $CLIENTOUT/client25.log | grep -a "User\:" | awk -F' ' '{print $5}' | head -1)
TMPID=$(cat $CLIENTOUT/client26.log | grep -a "User\:" | awk -F' ' '{print $5}' | head -1)
JONAHID=${TMPID}
echo "JONAH ID: $JONAHID"
## Client 25 will now wait for client 26's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destfile $CLIENTOUT/jonah26-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Single-use test: client53 sends message to client52; client52 responds with
# the same message in the set number of message parts
echo "TESTING SINGLE-USE"
# Generate contact file for client52
CLIENTCMD="../bin/client init -s blob52 -l $CLIENTOUT/client52.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jono52-contact.bin"
eval $CLIENTCMD >> /dev/null 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Start client53, which sends a message and then waits for a response
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client53.log -s blob53 --maxMessages 8 --message \"Test single-use message\" --send -c $CLIENTOUT/jono52-contact.bin --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client53.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
# Start client52, which waits for a message and then responds
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client52.log -s blob52 --reply --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client52.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
Richard T. Carback III
committed
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
# UD Test
echo "TESTING USER DISCOVERY..."
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --register josh13 --addemail josh13@elixxir.io --addphone 6178675309US"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --register josh31 --addemail josh31@elixxir.io --addphone 6178675310US"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --searchusername josh31 --searchemail josh31@elixxir.io --searchphone 6178675310US"
eval $CLIENTCMD > $CLIENTOUT/josh31.bin|| true &
PIDVAL1=$!
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --searchusername josh13 --searchemail josh13@elixxir.io --searchphone 6178675309US"
eval $CLIENTCMD > $CLIENTOUT/josh13.bin || true &
PIDVAL2=$!
wait $PIDVAL1
wait $PIDVAL2
# Send auth chan request
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
# Approve request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh31, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh13, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Test Remove User
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --remove josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13-2.log -s blob13-2 --register josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13-2.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
fi
Richard T. Carback III
committed
echo "TESTING GROUP CHAT..."
# Create authenticated channel between client 80 and 81
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --writeContact $CLIENTOUT/client80-contact.bin --unsafe -m \"Hello from contact 80 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client81.log -s blob81 --writeContact $CLIENTOUT/client81-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
while [ ! -s $CLIENTOUT/client81-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client80.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT80ID=${TMPID}
echo "CLIENT 80 ID: $CLIENT80ID"
TMPID=$(cat $CLIENTOUT/client81.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT81ID=${TMPID}
echo "CLIENT 81 ID: $CLIENT81ID"
# Client 81 will now wait for client 81's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client81-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL2
# Create authenticated channel between client 80 and 82
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client82.log -s blob82 --writeContact $CLIENTOUT/client82-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
while [ ! -s $CLIENTOUT/client82-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client82.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT82ID=${TMPID}
echo "CLIENT 82 ID: $CLIENT82ID"
# Client 82 will now wait for client 82's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client82-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL3
# User 1 Creates Group
echo "Group User IDs: $CLIENT80ID $CLIENT81ID $CLIENT82ID"
echo "b64:$CLIENT81ID" > $CLIENTOUT/groupParticipants
echo "b64:$CLIENT82ID" >> $CLIENTOUT/groupParticipants
CLIENTCMD="timeout 360s ../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --create $CLIENTOUT/groupParticipants --message \"80 inviting 81 and 82 to new group\""
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
eval $CLIENTCMD > $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Extract group ID -- Note to Jono this probably needs to be fixed!
GROUPID=$(cat $CLIENTOUT/client80.log | grep -a "NewGroupID\:" | awk -F' ' '{print $5}')
echo "Group ID: $GROUPID"
# Print the group list from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Print group from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Now everyone sends their message
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 80\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 81\""
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 82\""
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Everyone waits for their message
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --wait 2"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Member 2 leaves the group
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --leave $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL2
# 1 and 3 send a message successfully now, 2 does not
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello 2 from 80\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello 2 from 82\""
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# All 3 wait again
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --wait 1"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
sort -b -o "$CLIENTOUT/client80.txt" "$CLIENTOUT/client80.txt"
sort -b -o "$CLIENTOUT/client81.txt" "$CLIENTOUT/client81.txt"
sort -b -o "$CLIENTOUT/client82.txt" "$CLIENTOUT/client82.txt"
echo "GROUP CHAT FINISHED!"
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
echo "TESTING FILE TRANSFER..."
# Create authenticated channel between client 110 and 111
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client110.log -s blob110 --writeContact $CLIENTOUT/client110-contact.bin --unsafe -m \"Hello from contact 110 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client110.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client111.log -s blob111 --writeContact $CLIENTOUT/client111-contact.bin --destfile $CLIENTOUT/client110-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client111.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
while [ ! -s $CLIENTOUT/client111-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client110.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT110ID=${TMPID}
echo "CLIENT 110 ID: $CLIENT110ID"
TMPID=$(cat $CLIENTOUT/client111.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT111ID=${TMPID}
echo "CLIENT 111 ID: $CLIENT111ID"
# Client 110 will now wait for client 111's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client110.log -s blob110 --destfile $CLIENTOUT/client111-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client110.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL2
# Client 111 sends a file to client 110
CLIENTCMD="timeout 360s ../bin/client fileTransfer -s blob110 -l $CLIENTOUT/client110.log $CLIENTFILETRANSFEROPTS"
eval $CLIENTCMD > $CLIENTOUT/client110.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="timeout 360s ../bin/client fileTransfer -s blob111 -l $CLIENTOUT/client111.log $CLIENTFILETRANSFEROPTS --sendFile $CLIENTOUT/client110-contact.bin --filePath LoremIpsum.txt --filePreviewString \"Lorem ipsum dolor sit amet, consectetur adipiscing elit.\" --maxThroughput 5000 --retry 0"
eval $CLIENTCMD > $CLIENTOUT/client111.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL1
wait $PIDVAL2
echo "FILE TRANSFER FINISHED..."
echo "TESTS EXITED SUCCESSFULLY, CHECKING OUTPUT..."
cp $CLIENTOUT/*.txt $CLIENTCLEAN/
sed -i.bak 's/Sending\ to\ .*\:/Sent:/g' $CLIENTCLEAN/client*.txt
sed -i.bak 's/Message\ from\ .*, .* Received:/Received:/g' $CLIENTCLEAN/client*.txt
Richard T. Carback III
committed
sed -i.bak 's/ERROR.*Signature/Signature/g' $CLIENTCLEAN/client*.txt
sed -i.bak 's/[Aa]uthenticat.*$//g' $CLIENTCLEAN/client*.txt
rm $CLIENTCLEAN/client*.txt.bak
for C in $(ls -1 $CLIENTCLEAN | grep -v client11[01]); do
sort -o tmp $CLIENTCLEAN/$C || true
cp tmp $CLIENTCLEAN/$C
# uniq tmp $CLIENTCLEAN/$C || true
done
GOLDOUTPUT=clients.goldoutput
if [ "$NETWORKENTRYPOINT" != "localhost:8440" ]
then
rm -fr clients.net_goldoutput || true
GOLDOUTPUT=clients.net_goldoutput
# Delete the localhost only files
rm $GOLDOUTPUT/client13* || true
rm $GOLDOUTPUT/client18* || true
rm $GOLDOUTPUT/client19* || true
rm $GOLDOUTPUT/client2[01]* || true
rm $GOLDOUTPUT/client31* || true
rm $GOLDOUTPUT/client3[56]* || true
rm $GOLDOUTPUT/client45* || true
rm $GOLDOUTPUT/client56* || true
rm $GOLDOUTPUT/client67* || true
rm $GOLDOUTPUT/client74* || true
rm $GOLDOUTPUT/client9* || true
fi
diff -aruN $GOLDOUTPUT $CLIENTCLEAN
cat $CLIENTOUT/client42.log | grep -a "Could not confirm authentication channel" > results/deleteContact.txt || true
echo "CHECKING FOR SUCCESSFUL CONTACT DELETION"
if [ -s results/deleteContact.txt ]
then
echo "CONTACT DELETION SUCCESSFUL"
else
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
#cat $CLIENTOUT/* | strings | grep -ae "ERROR" -e "FATAL" > results/client-errors || true
#diff -ruN results/client-errors.txt noerrors.txt
cat $SERVERLOGS/server-*.log | grep -a "ERROR" | grep -a -v "context" | grep -av "metrics" | grep -av "database" > results/server-errors.txt || true
cat $SERVERLOGS/server-*.log | grep -a "FATAL" | grep -a -v "context" | grep -av "transport is closing" | grep -av "database" >> results/server-errors.txt || true
diff -aruN results/server-errors.txt noerrors.txt
IGNOREMSG="GetRoundBufferInfo: Error received: rpc error: code = Unknown desc = round buffer is empty"
cat $GATEWAYLOGS/*.log | grep -a "ERROR" | grep -av "context" | grep -av "certificate" | grep -av "Failed to read key" | grep -av "$IGNOREMSG" > results/gateway-errors.txt || true
cat $GATEWAYLOGS/*.log | grep -a "FATAL" | grep -av "context" | grep -av "transport is closing" >> results/gateway-errors.txt || true
diff -aruN results/gateway-errors.txt noerrors.txt
fi