Newer
Older
# NOTE: This is verbose on purpose.
set -e
mv results results.bak || rm -fr results || true
rm -fr blob* || true
rm server-5.qdstrm || true
rm server-5.qdrep || true
mkdir -p .elixxir
if [ $# -gt 1 ]
then
echo "usage: $0 [gatewayip:port]"
exit
fi
NETWORKENTRYPOINT=$1
UDBOUT=results/udb-console.txt
CLIENTCLEAN=results/clients-cleaned
CLIENTOPTS="--password hello --ndf results/ndf.json --verify-sends --sendDelay 100 --waitTimeout 360 --unsafe-channel-creation -v $DEBUGLEVEL"
CLIENTUDOPTS="--password hello --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTSINGLEOPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTGROUPOPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTFILETRANSFEROPTS="--password hello --waitTimeout 360 --ndf results/ndf.json -v $DEBUGLEVEL"
CLIENTREKEYOPTS="--password hello --ndf results/ndf.json --verify-sends --waitTimeout 420 --unsafe-channel-creation -v $DEBUGLEVEL"
mkdir -p $CLIENTCLEAN
if [ "$NETWORKENTRYPOINT" == "betanet" ]
then
NETWORKENTRYPOINT=$(sort -R betanet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "mainnet" ]
NETWORKENTRYPOINT=$(sort -R mainnet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "release" ]
then
NETWORKENTRYPOINT=$(sort -R release.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "devnet" ]
then
NETWORKENTRYPOINT=$(sort -R devnet.txt | head -1)
elif [ "$NETWORKENTRYPOINT" == "" ]
then
NETWORKENTRYPOINT=$(head -1 network.config)
fi
echo "NETWORK: $NETWORKENTRYPOINT"
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
echo "STARTING SERVERS..."
Richard T. Carback III
committed
# Copy udbContact into place when running locally.
cp udbContact.bin results/udbContact.bin
PERMCMD="../bin/permissioning --logLevel $DEBUGLEVEL -c permissioning.yaml "
$PERMCMD > results/permissioning-console.txt 2>&1 &
echo "$PERMCMD -- $PIDVAL"
# Run Client Registrar
CLIENT_REG_CMD="../bin/client-registrar \
-l 2 -c client-registrar.yaml"
$CLIENT_REG_CMD > results/client-registrat-console.txt 2>&1 &
PIDVAL=$!
echo "$CLIENT_REG_CMD -- $PIDVAL"
for SERVERID in $(seq 5 -1 1)
do
IDX=$(($SERVERID - 1))
SERVERCMD="../bin/server --logLevel $DEBUGLEVEL --config server-$SERVERID.yaml"
if [ $SERVERID -eq 5 ] && [ -n "$NSYSENABLED" ]
then
SERVERCMD="nsys profile --session-new=gputest --trace=cuda -o server-$SERVERID $SERVERCMD"
fi
$SERVERCMD > $SERVERLOGS/server-$SERVERID-console.txt 2>&1 &
PIDVAL=$!
echo "$SERVERCMD -- $PIDVAL"
done
# Start gateways
for GWID in $(seq 5 -1 1)
IDX=$(($GWID - 1))
GATEWAYCMD="../bin/gateway --logLevel $DEBUGLEVEL --config gateway-$GWID.yaml"
$GATEWAYCMD > $GATEWAYLOGS/gateway-$GWID-console.txt 2>&1 &
PIDVAL=$!
echo "$GATEWAYCMD -- $PIDVAL"
Richard T. Carback III
committed
jobs -p > results/serverpids
Richard T. Carback III
committed
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
finish() {
echo "STOPPING SERVERS AND GATEWAYS..."
if [ -n "$NSYSENABLED" ]
then
nsys stop --session=gputest
fi
# NOTE: jobs -p doesn't work in a signal handler
for job in $(cat results/serverpids)
do
echo "KILLING $job"
kill $job || true
done
sleep 5
for job in $(cat results/serverpids)
do
echo "KILL -9 $job"
kill -9 $job || true
done
#tail $SERVERLOGS/*
#tail $CLIENTCLEAN/*
#diff -aruN clients.goldoutput $CLIENTCLEAN
}
trap finish EXIT
trap finish INT
# Sleeps can die in a fire on the sun, we wait for the servers to start running
# rounds
rm rid.txt || true
touch rid.txt
cnt=0
echo -n "Waiting for a round to run"
while [ ! -s rid.txt ] && [ $cnt -lt 120 ]; do
sleep 1
grep -a "RID 1 ReceiveFinishRealtime END" results/servers/server-* > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
Richard T. Carback III
committed
done
# Start a user discovery bot server
echo "STARTING UDB..."
UDBCMD="../bin/udb --logLevel $DEBUGLEVEL --protoUserPath udbProto.json --config udb.yaml -l 1"
$UDBCMD >> $UDBOUT 2>&1 &
PIDVAL=$!
echo $PIDVAL >> results/serverpids
echo "$UDBCMD -- $PIDVAL"
rm rid.txt || true
while [ ! -s rid.txt ] && [ $cnt -lt 30 ]; do
sleep 1
grep -a "Sending Poll message" results/udb-console.txt > rid.txt || true
cnt=$(($cnt + 1))
echo -n "."
done
echo "localhost:8440" > results/startgwserver.txt
echo "DONE LETS DO STUFF"
else
echo "Connecting to network defined at $NETWORKENTRYPOINT"
echo $NETWORKENTRYPOINT > results/startgwserver.txt
fi
echo "DOWNLOADING TLS Cert..."
CMD="openssl s_client -showcerts -connect $(cat results/startgwserver.txt)"
echo $CMD
eval $CMD < /dev/null 2>&1 > "results/startgwcert.bin"
CMD="cat results/startgwcert.bin | openssl x509 -outform PEM"
echo $CMD
eval $CMD > "results/startgwcert.pem"
head "results/startgwcert.pem"
echo "DOWNLOADING NDF..."
CLIENTCMD="../bin/client getndf --gwhost $(cat results/startgwserver.txt) --cert results/startgwcert.pem"
eval $CLIENTCMD >> results/ndf.json 2>&1 &
echo "$CLIENTCMD -- $PIDVAL"
Richard T. Carback III
committed
wait $PIDVAL
cat results/ndf.json | jq . | head -5
Richard T. Carback III
committed
file results/ndf.json
if [ ! -s results/ndf.json ]
then
echo "results/ndf.json is empty, cannot proceed"
exit -1
fi
#export GRPC_GO_LOG_VERBOSITY_LEVEL=99
#export GRPC_GO_LOG_SEVERITY_LEVEL=info
Jonah Husson
committed
echo "RUNNING CLIENTS..."
runclients() {
echo "Starting clients..."
Rick Carback
committed
# Now send messages to each other
# TODO: Change the recipients to send multiple messages. We can't
# run multiple clients with the same user id so we need
# updates to make that work.
# for nid in 1 2 3 4; do
for nid in 1
do
nid=$(((($cid + 1) % 4) + 4))
eval NICK=\${NICK${cid}}
mkdir -p blob$cid
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client$cid$nid.log -s blob$cid/blob$cid --unsafe --sendid $cid --destid $nid --sendCount 20 --receiveCount 20 -m \"Hello, $nid\""
eval $CLIENTCMD >> $CLIENTOUT/client$cid$nid.txt 2>&1 &
Rick Carback
committed
PIDVAL=$!
eval CLIENTS${CTR}=$PIDVAL
echo "$CLIENTCMD -- $PIDVAL"
CTR=$(($CTR + 1))
done
echo "WAITING FOR $CTR CLIENTS TO EXIT..."
for i in $(seq 0 $(($CTR - 1)))
eval echo "Waiting on \${CLIENTS${i}} ..."
eval wait \${CLIENTS${i}}
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
echo "RUNNING BASIC CLIENTS..."
runclients
echo "RUNNING BASIC CLIENTS (2nd time)..."
runclients
# Send E2E messages between a single user
mkdir -p blob9
mkdir -p blob18
mkdir -p blob91
echo "TEST E2E WITH PRECANNED USERS..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendCount 2 --receiveCount 2 -s blob9/blob9 --sendid 9 --destid 9 -m \"Hi 9->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18.log --sendCount 2 --receiveCount 2 -s blob18/blob18 --slowPolling --sendid 18 --destid 18 -m \"Hi 18->18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18.txt 2>&1 &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Send E2E messages between two users
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9.log --sendCount 3 --receiveCount 3 -s blob9/blob9 --sendid 9 --destid 18 -m \"Hi 9->18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9.txt 2>&1 &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18.log --sendCount 3 --receiveCount 3 -s blob18/blob18 --sendid 18 --destid 9 -m \"Hi 18->9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18.txt 2>&1 &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL1
wait $PIDVAL2
# Send multiple E2E encrypted messages between users that discovered each other
echo "SENDING MESSAGES TO PRECANNED USERS AND FORCING A REKEY..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client18_rekey.log --sendCount 20 --receiveCount 20 --destid 9 -s blob18/blob18 -m \"Hello, 9, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client18_rekey.txt 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client9_rekey.log --sendCount 20 --receiveCount 20 --destid 18 -s blob9/blob9 -m \"Hello, 18, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client9_rekey.txt 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL || true
echo "FORCING HISTORICAL ROUNDS... (NON-E2E, PRECAN)"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client33.log -s blob33 --sendid 1 --destid 2 --sendCount 5 --receiveCount 5 -m \"Hello from 1, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client33.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client34.log -s blob34 --sendid 2 --destid 1 --sendCount 5 --receiveCount 5 -m \"Hello from 2, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client34.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "FORCING MESSAGE PICKUP RETRY... (NON-E2E, PRECAN)"
# Higher timeouts for this test to allow message pickup retry to function
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client20.log -s blob20 --sendid 20 --destid 21 --sendCount 5 --receiveCount 5 -m \"Hello from 20, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client20.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry --unsafe -l $CLIENTOUT/client21.log -s blob21 --sendid 21 --destid 20 --sendCount 5 --receiveCount 5 -m \"Hello from 21, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client21.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Non-precanned E2E user messaging
echo "SENDING E2E MESSAGES TO NEW USERS..."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --writeContact $CLIENTOUT/rick42-contact.bin --unsafe -m \"Hello from Rick42 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --writeContact $CLIENTOUT/ben43-contact.bin --destfile $CLIENTOUT/rick42-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
while [ ! -s $CLIENTOUT/ben43-contact.bin ]; do
sleep 1
echo -n "."
done
TMPID=$(cat $CLIENTOUT/client42.log | grep -a "User\:" | awk -F' ' '{print $5}')
RICKID=${TMPID}
echo "RICK ID: $RICKID"
TMPID=$(cat $CLIENTOUT/client43.log | grep -a "User\:" | awk -F' ' '{print $5}')
BENID=${TMPID}
echo "BEN ID: $BENID"
# Client 42 will now wait for client 43's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "TESTING RENEGOTIATION..."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destfile $CLIENTOUT/rick42-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
# Client 42 will now wait, again, for client 43's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL1
wait $PIDVAL2
#Send a few messages
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
wait $PIDVAL
wait $PIDVAL2
# Switch places, 42 renegotiates with 43
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destfile $CLIENTOUT/ben43-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
# Client 43 will now wait, for client 42's renegotiated E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destfile $CLIENTOUT/rick42-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL1
wait $PIDVAL2
#Send a few more messages
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client43.log -s blob43 --destid b64:$RICKID --sendCount 5 --receiveCount 5 -m \"Hello from Ben43, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client43.txt || true &
PIDVAL2=$!
wait $PIDVAL
wait $PIDVAL2
echo "DELETING CONTACT FROM CLIENT..."
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --delete-channel --destfile $CLIENTOUT/ben43-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
echo "$CLIENTCMD -- $PIDVAL"
PIDVAL1=$!
wait $PIDVAL1
# NOTE the command below causes the following EXPECTED error:
# panic: Could not confirm authentication channel for HTAmEeBhbLi6aFqcWsi3OZNDE/642GAchpATjhYFTHwD, waited 120 seconds.
# Note that the above is example, client IDs will vary
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$BENID --sendCount 5 --receiveCount 5 -m \"Hello from Rick42, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
echo "NOTE: The command above causes an EXPECTED failure to confirm authentication channel!"
wait $PIDVAL2
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
echo "DELETING REQUESTS FROM CLIENT.."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client44.log -s blob44 --writeContact $CLIENTOUT/david44-contact.bin --unsafe -m \"Hello from David44 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client44.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client45.log -s blob45 --writeContact $CLIENTOUT/matt45-contact.bin --destfile $CLIENTOUT/matt45-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client45.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
TMPID=$(cat $CLIENTOUT/client44.log | grep -a "User\:" | awk -F' ' '{print $5}')
DAVIDID=${TMPID}
echo "BEN ID: $DAVIDID"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client45.log -s blob45 --delete-sent-requests --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client45.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client42.log -s blob42 --destid b64:$DAVIDID --sendCount 5 --receiveCount 5 -m \"Hello from David, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client42.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
echo "NOTE: The command above causes an EXPECTED failure to confirm authentication channel!"
wait $PIDVAL2
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
echo "CREATING USERS for SIMULTANEOUSAUTH TEST..."
JONOID=$(../bin/client init -s blob85 -l $CLIENTOUT/client85.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jono85-contact.bin -v $DEBUGLEVEL)
SYDNEYID=$(../bin/client init -s blob86 -l $CLIENTOUT/client86.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/sydney86-contact.bin -v $DEBUGLEVEL)
echo "JONO ID: $JONOID"
echo "SYDNEY ID: $SYDNEYID"
# Attempt to send an auth request at the same time. It's not guaranteed that
# one side won't send and the other won't receive before sending their request
# but this method has proven to be reasonably reliable.
echo "STARTING SIMULTANEOUSAUTH TEST..."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client85.log -s blob85 --destfile $CLIENTOUT/sydney86-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client85.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client86.log -s blob86 --destfile $CLIENTOUT/jono85-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client86.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL1
wait $PIDVAL2
# Send a couple messages
echo "TESTING SIMULTANEOUSAUTH MESSAGE SEND..."
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client85.log -s blob85 --destfile $CLIENTOUT/sydney86-contact.bin --sendCount 5 --receiveCount 5 -m \"Hello Sydney from Jono, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client85.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client86.log -s blob86 --destfile $CLIENTOUT/jono85-contact.bin --sendCount 5 --receiveCount 5 -m \"Hello Jono from Sydney, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client86.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL1
wait $PIDVAL2
echo "CREATING USERS for REKEY TEST..."
JAKEID=$(../bin/client init -s blob100 -l $CLIENTOUT/client100.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Jake100-contact.bin -v $DEBUGLEVEL)
NIAMHID=$(../bin/client init -s blob101 -l $CLIENTOUT/client101.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/Niamh101-contact.bin -v $DEBUGLEVEL)
echo "JAKE ID: $JAKEID"
echo "NIAMH ID: $NIAMHID"
Richard T. Carback III
committed
REKEYOPTS="--e2eMaxKeys 15 --e2eMinKeys 10 --e2eNumReKeys 5 --e2eRekeyThreshold 0.75"
# Client 101 will now send auth request
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --writeContact $CLIENTOUT/Niamh101-contact.bin --destfile $CLIENTOUT/Jake100-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
# Client 100 will now wait for client 101's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
Richard T. Carback III
committed
echo "RUNNING REKEY TEST..."
# Test destid syntax too, note wait for 11 messages to catch the message from above ^^^
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 20 -m \"Hello from Jake100, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 20 --receiveCount 20 -m \"Hello from Niamh101, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
Richard T. Carback III
committed
# Now we are just going to exhaust all the keys we have and see if we
# use the unconfirmed channels
CLIENTCMD="timeout 420s ../bin/client $CLIENTREKEYOPTS $REKEYOPTS -l $CLIENTOUT/client100.log -s blob100 --destid b64:$NIAMHID --sendCount 20 --receiveCount 0 -m \"Hello from Jake100, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client100.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# And receive those messages sent to us
CLIENTCMD="timeout 420s ../bin/client $CLIENTREKEYOPTS $REKEYOPTS -l $CLIENTOUT/client101.log -s blob101 --destid b64:$JAKEID --sendCount 0 --receiveCount 20"
eval $CLIENTCMD >> $CLIENTOUT/client101.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL2
echo "FORCING HISTORICAL ROUNDS..."
FH1ID=$(../bin/client init -s blob35 -l $CLIENTOUT/client35.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/FH1-contact.bin -v $DEBUGLEVEL)
FH2ID=$(../bin/client init -s blob36 -l $CLIENTOUT/client36.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/FH2-contact.bin -v $DEBUGLEVEL)
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client35.log -s blob35 --destid b64:$FH2ID --sendCount 5 --receiveCount 5 -m \"Hello from 35, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client35.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS --forceHistoricalRounds --unsafe -l $CLIENTOUT/client36.log -s blob36 --destid b64:$FH1ID --sendCount 5 --receiveCount 5 -m \"Hello from 36, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client36.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "FORCING MESSAGE PICKUP RETRY... "
FM1ID=$(../bin/client init -s blob22 -l $CLIENTOUT/client22.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/FM1-contact.bin -v $DEBUGLEVEL)
FM2ID=$(../bin/client init -s blob23 -l $CLIENTOUT/client23.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/FM2-contact.bin -v $DEBUGLEVEL)
# Higher timeouts for this test to allow message pickup retry to function
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client22.log -s blob22 --destid b64:$FM2ID --sendCount 5 --receiveCount 5 -m \"Hello from 22, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client22.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS --forceMessagePickupRetry -l $CLIENTOUT/client23.log -s blob23 --destid b64:$FM1ID --sendCount 5 --receiveCount 5 -m \"Hello from 23, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client23.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
echo "CREATING USERS FOR BACKUP..."
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client120.log -s blob120A --writeContact $CLIENTOUT/client120-contact.bin --unsafe -m \"Hello from Client120 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client121.log -s blob121A --writeContact $CLIENTOUT/client121-contact.bin --destfile $CLIENTOUT/client120-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
while [ ! -s $CLIENTOUT/client121-contact.bin ]; do
sleep 1
echo -n "."
done
wait $PIDVAL2
TMPID=$(cat $CLIENTOUT/client120.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT120ID=${TMPID}
echo "CLIENT 120 ID: $CLIENT120ID"
TMPID=$(cat $CLIENTOUT/client121.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT121ID=${TMPID}
echo "BEN ID: $CLIENT121ID"
# Client 120 will now wait for client 121's E2E Auth channel request and confirm
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client120.log -s blob120A --destfile $CLIENTOUT/client121-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Send messages
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client120.log -s blob120A --destid b64:$CLIENT121ID --sendCount 5 --receiveCount 5 -m \"Hello from Client120, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client121.log -s blob121A --destid b64:$CLIENT120ID --sendCount 5 --receiveCount 5 -m \"Hello from Client121, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Backup 120 and restore
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client120.log -s blob120A --password hello --ndf results/ndf.json -v $DEBUGLEVEL --backupOut $CLIENTOUT/client120A.backup --backupPass hello --backupJsonOut $CLIENTOUT/client120A.backup.json"
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client120.log -s blob120B --password hello --ndf results/ndf.json -v $DEBUGLEVEL --backupIn $CLIENTOUT/client120A.backup --backupPass hello --backupJsonOut $CLIENTOUT/client120B.backup.json --backupIdList $CLIENTOUT/client120Partners.json"
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client120.log -s blob120B --batchadd $CLIENTOUT/client120Partners.json"
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Send messages
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client120.log -s blob120B --destid b64:$CLIENT121ID --sendCount 5 --receiveCount 5 -m \"Hello from Client120, with E2E Encryption after 120 restoring backup\""
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client121.log -s blob121A --destid b64:$CLIENT120ID --sendCount 5 --receiveCount 5 -m \"Hello from Client121, with E2E Encryption after 120 restoring backup\""
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Backup 121 and restore
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client121.log -s blob121A --password hello --ndf results/ndf.json -v $DEBUGLEVEL --backupOut $CLIENTOUT/client121A.backup --backupPass hello --backupJsonOut $CLIENTOUT/client121A.backup.json"
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client121.log -s blob121B --password hello --ndf results/ndf.json -v $DEBUGLEVEL --backupIn $CLIENTOUT/client121A.backup --backupPass hello --backupJsonOut $CLIENTOUT/client121B.backup.json --backupIdList $CLIENTOUT/client121Partners.json"
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client121.log -s blob121B --batchadd $CLIENTOUT/client121Partners.json"
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Send messages
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client120.log -s blob120B --destid b64:$CLIENT121ID --sendCount 5 --receiveCount 5 -m \"Hello from Client120, with E2E Encryption after 121 restoring backup\""
eval $CLIENTCMD >> $CLIENTOUT/client120.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 360s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client121.log -s blob121B --destid b64:$CLIENT120ID --sendCount 5 --receiveCount 5 -m \"Hello from Client121, with E2E Encryption after 121 restoring backup\""
eval $CLIENTCMD >> $CLIENTOUT/client121.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Proto user test: client25 and client26 generate a proto user JSON file and close.
# Both clients are restarted and load from their respective proto user files and attempt to send.
# Generate contact and proto user file for client25
echo "TESTING PROTO USER FILE..."
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client25.log -s blob11420 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/josh25-contact.bin --protoUserOut $CLIENTOUT/client25Proto.json "
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Generate contact and proto user file for client 26
CLIENTCMD="timeout 20s ../bin/client -l $CLIENTOUT/client26.log -s blob11421 --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jonah26-contact.bin --protoUserOut $CLIENTOUT/client26Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Clients will now load from the protoUser file and write to session
CLIENTCMD="timeout 60s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --protoUserPath $CLIENTOUT/client25Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 60s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --protoUserPath $CLIENTOUT/client26Proto.json"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL
wait $PIDVAL2
# Continue with E2E testing with session files loaded from proto
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --writeContact $CLIENTOUT/josh25-contact.bin --unsafe -m \"Hello from Josh25 to myself, without E2E Encryption\" "
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --writeContact $CLIENTOUT/jonah26-contact.bin --destfile $CLIENTOUT/josh25-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
while [ ! -s $CLIENTOUT/jonah26-contact.bin ]; do
sleep 1
echo -n "."
done
# Print IDs to console
TMPID=$(cat $CLIENTOUT/client25.log | grep -a "User\:" | awk -F' ' '{print $5}' | head -1)
TMPID=$(cat $CLIENTOUT/client26.log | grep -a "User\:" | awk -F' ' '{print $5}' | head -1)
JONAHID=${TMPID}
echo "JONAH ID: $JONAHID"
## Client 25 will now wait for client 26's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destfile $CLIENTOUT/jonah26-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client25.log -s blob25 --destid b64:$JONAHID --sendCount 5 --receiveCount 5 -m \"Hello from Josh25, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client25.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client26.log -s blob26 --destid b64:$JOSHID --sendCount 5 --receiveCount 5 -m \"Hello from Jonah26, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client26.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Single-use test: client53 sends message to client52; client52 responds with
# the same message in the set number of message parts
echo "TESTING SINGLE-USE"
# Generate contact file for client52
CLIENTCMD="../bin/client init -s blob52 -l $CLIENTOUT/client52.log --password hello --ndf results/ndf.json --writeContact $CLIENTOUT/jono52-contact.bin"
eval $CLIENTCMD >> /dev/null 2>&1 || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
# Start client53, which sends a message and then waits for a response
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client53.log -s blob53 --maxMessages 8 --message \"Test single-use message\" --send -c $CLIENTOUT/jono52-contact.bin --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client53.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
# Start client52, which waits for a message and then responds
CLIENTCMD="timeout 240s ../bin/client single $CLIENTSINGLEOPTS -l $CLIENTOUT/client52.log -s blob52 --reply --timeout 90s"
eval $CLIENTCMD >> $CLIENTOUT/client52.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
Richard T. Carback III
committed
if [ "$NETWORKENTRYPOINT" == "localhost:8440" ]
then
# UD Test
echo "TESTING USER DISCOVERY..."
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --register josh13 --addemail josh13@elixxir.io --addphone 6178675309US"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --register josh31 --addemail josh31@elixxir.io --addphone 6178675310US"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --searchusername josh31 --searchemail josh31@elixxir.io --searchphone 6178675310US"
eval $CLIENTCMD > $CLIENTOUT/josh31.bin|| true &
PIDVAL1=$!
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client31.log -s blob31 --searchusername josh13 --searchemail josh13@elixxir.io --searchphone 6178675309US"
eval $CLIENTCMD > $CLIENTOUT/josh13.bin || true &
PIDVAL2=$!
wait $PIDVAL1
wait $PIDVAL2
# Send auth chan request
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
# Approve request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
Richard T. Carback III
committed
echo "$CLIENTCMD -- $PIDVAL2"
wait $PIDVAL2
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client31.log -s blob31 --destfile $CLIENTOUT/josh13.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh31, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client31.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client13.log -s blob13 --destfile $CLIENTOUT/josh31.bin --sendCount 5 --receiveCount 5 -m \"Hello from Josh13, with E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
wait $PIDVAL2
# Test Remove User
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13.log -s blob13 --remove josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
CLIENTCMD="timeout 240s ../bin/client ud $CLIENTUDOPTS -l $CLIENTOUT/client13-2.log -s blob13-2 --register josh13"
eval $CLIENTCMD >> $CLIENTOUT/client13-2.txt || true &
PIDVAL=$!
echo "$CLIENTCMD -- $PIDVAL"
wait $PIDVAL
fi
Richard T. Carback III
committed
echo "TESTING GROUP CHAT..."
# Create authenticated channel between client 80 and 81
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --writeContact $CLIENTOUT/client80-contact.bin --unsafe -m \"Hello from contact 80 to myself, without E2E Encryption\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client81.log -s blob81 --writeContact $CLIENTOUT/client81-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
while [ ! -s $CLIENTOUT/client81-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client80.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT80ID=${TMPID}
echo "CLIENT 80 ID: $CLIENT80ID"
TMPID=$(cat $CLIENTOUT/client81.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT81ID=${TMPID}
echo "CLIENT 81 ID: $CLIENT81ID"
# Client 81 will now wait for client 81's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client81-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL2
# Create authenticated channel between client 80 and 82
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client82.log -s blob82 --writeContact $CLIENTOUT/client82-contact.bin --destfile $CLIENTOUT/client80-contact.bin --send-auth-request --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
while [ ! -s $CLIENTOUT/client82-contact.bin ]; do
sleep 1
echo -n "."
done
echo
TMPID=$(cat $CLIENTOUT/client82.log | grep -a "User\:" | awk -F' ' '{print $5}')
CLIENT82ID=${TMPID}
echo "CLIENT 82 ID: $CLIENT82ID"
# Client 82 will now wait for client 82's E2E Auth channel request and confirm
CLIENTCMD="timeout 240s ../bin/client $CLIENTOPTS -l $CLIENTOUT/client80.log -s blob80 --destfile $CLIENTOUT/client82-contact.bin --sendCount 0 --receiveCount 0"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
wait $PIDVAL1
wait $PIDVAL3
# User 1 Creates Group
echo "Group User IDs: $CLIENT80ID $CLIENT81ID $CLIENT82ID"
echo "b64:$CLIENT81ID" > $CLIENTOUT/groupParticipants
echo "b64:$CLIENT82ID" >> $CLIENTOUT/groupParticipants
CLIENTCMD="timeout 360s ../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --create $CLIENTOUT/groupParticipants --message \"80 inviting 81 and 82 to new group\""
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
eval $CLIENTCMD > $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --join"
eval $CLIENTCMD > $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Extract group ID -- Note to Jono this probably needs to be fixed!
GROUPID=$(cat $CLIENTOUT/client80.log | grep -a "NewGroupID\:" | awk -F' ' '{print $5}')
echo "Group ID: $GROUPID"
# Print the group list from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --list"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Print group from all users
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client81.txt 2>&1 || true &
PIDVAL2=$!
echo "$CLIENTCMD -- $PIDVAL2"
CLIENTCMD="../bin/client group -s blob82 -l $CLIENTOUT/client82.log $CLIENTGROUPOPTS --show $GROUPID"
eval $CLIENTCMD >> $CLIENTOUT/client82.txt 2>&1 || true &
PIDVAL3=$!
echo "$CLIENTCMD -- $PIDVAL3"
wait $PIDVAL1
wait $PIDVAL2
wait $PIDVAL3
# Now everyone sends their message
CLIENTCMD="../bin/client group -s blob80 -l $CLIENTOUT/client80.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 80\""
eval $CLIENTCMD >> $CLIENTOUT/client80.txt 2>&1 || true &
PIDVAL1=$!
echo "$CLIENTCMD -- $PIDVAL1"
CLIENTCMD="../bin/client group -s blob81 -l $CLIENTOUT/client81.log $CLIENTGROUPOPTS --sendMessage $GROUPID --message \"Hello from 81\""